# On-Site Frame Support

> Support frame project developed from a marked-up site sketch into cleaner 3D geometry and fabrication-led review information.

Canonical: https://clarkecad.co.uk/projects/on-site-frame/
Updated: 2026-08-05

Industry: steel fabrication

## Information supplied

- Hand sketch with key dimensions
- Existing leg position
- 3D model source

## CAD work prepared

- 3D support frame model
- Beam, brace and plate layout
- Review-ready fabrication references

## Challenge

The supplied sketch set out a support frame around existing site equipment, with enough dimensions and notes to define the main beam, base plate and stabilising brace arrangement. The layout needed to be easier to review before fabrication planning moved forward.

## Clarke CAD scope

Clarke CAD converted the marked-up site information into a cleaner 3D model and a more structured support layout for fabrication planning.

## Deliverables

- Reviewable 3D model of the support frame
- Beam, brace and base plate arrangement
- Drawing-led references to support discussion before fabrication

## Outcome

The model turns the marked-up site sketch into a single support-frame reference, making the beam, brace and base-plate relationship easier to check.

- [View the canonical project page](https://clarkecad.co.uk/projects/on-site-frame/)
- [Discuss a similar project](https://clarkecad.co.uk/contact/)